The command to set this is one of the following:
For most newer Linux releases:
cpupower frequency-set -g performance
For some older Debian/Ubuntu systems:
cpufreq-set -r -g performance
To confirm what governor you are using, you can use one of these commands:
cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
cpupower -c 0-N frequency-info (where N is the number of cores)
To watch the CPU governor in action, you can do this:
watch -n 1 grep MHz /proc/cpuinfo
To see the range of possible clock speeds for your CPUs, you can use the lscpu command.
You can also set the default CPU governor in the BIOS. Note that if you manually set the CPU power setting in the BIOS, then these commands may not work.
Reference: CPU Frequency Scaling
]]>watch -n.1 "grep \"^[c]pu MHz\" /proc/cpuinfo"
2166,779
2166,779
sudo lscpu
CPU max MHz: 2165.8000
CPU min MHz: 499.8000
sudo apt install intel-gpu-tools
sudo su
intel_gpu_frequency -help
intel-gpu-overlay
For closing the app: pidof intel-gpu-overlay and then sudo kill -9 process_ID
Method 7: Using i7z
The i7z is a dedicated tool for displaying processor states on Intel i3, i5, and i7 based CPUs.
sudo apt-get install i7z
sudo i7z
https://github.com/jmechnich/intel-power-control
https://bwidawsk.net/blog/2015/5/a-bit- … frequency/
https://stevescargall.com/2020/02/12/ho … rformance/
cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo "performance" | sudo tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor